海藻酸钠/大豆蛋白共混凝胶微球的结构

利用钙离子交联海藻酸钠／大豆分离蛋白共混溶液，制得海藻酸钠／大豆分离蛋共混凝胶微球．结果表明，海藻酸钠和大豆分离蛋白质量配比的不同以及各组分间相互作用的变化，微球呈现不同的微观结构．将微球干燥后置于水中溶胀，微球的尺寸无法回复到干燥前的尺寸，这是由于真空干燥处理使水分子挥发，促进微球内组分间形成了强的氢键作用所致．此外，用碱处理该共混微球，发现由于大豆分离蛋白溶解以及部分钙离子被置换析出，微球塌陷且内部形成了大孔．     

Comparison of different reactive organophosphorus flame retardant agents for cotton: Part I. The bonding of the flame retardant agents to cotton

N-Methylol dimethylphosphonopropionamide (MDPA), known as “Pyrovatex CP” and “Pyrovatex CP New” commercially, has been one of the most commonly used durable flame retardant agents for cotton for many years. In our previous research, we developed a flame retardant finishing system for cotton based on a hydroxy-functional organophosphorus oligomer (HFPO) in combination with a bonding agent such as trimethylolmelamine (TMM) and dimethyloldihydroxyethyleneurea (DMDHEU). In this research, we investigated the bonding of these two flame retardant finishing agents to cotton. We found that the majority of MDPA is bound to cotton by its N-methylol group and that the use of TMM as a co-reactant modestly increases the fixation of MDPA onto cotton. For HFPO, however, the use of a bonding agent is necessary to form a covalent linkage between HFPO and cotton. Both the fixation of HFPO on cotton and its laundering durability are influenced by the effectiveness and concentration of the bonding agent. The commercial product of HFPO contains approximately 33% more phosphorus than that of MDPA and the percent fixation of HFPO on cotton is also moderately higher than that of MDPA. The bonding between MDPA and cotton is significantly more resistant to hydrolysis during multiple launderings than that between HFPO and cotton. The selection of catalyst also plays a significant role in influencing the bonding of the flame retardant agents to cotton.     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Synthesis and antimicrobial activity of a perfluoroalkyl-containing quaternary ammonium salt

A novel perfluoroalkyl-containing quaternary ammonium salt 5 was designed and synthesized. Consequently, the antimicrobial activities of compound 5 were measured with Escherichia coli 8099 as a Gram-negative strain and Staphylococcus aureus ATCC 6538 as a Gram-positive strain. Both the minimum inhibitory concentration (MIC, the lowest concentration of compound 5 that inhibits microbial growth) values of quaternary ammonium salt 5 against Escherichia coli 8099 and Staphylococcus aureus ATCC 6538 were 7.8 μg/ml.     

Synthesis of perfluoroalkyl-containing multifunctional groups compounds for textile finishing

A new kind of perfluoroalkyl-containing multifunctional groups compound was designed. Treatment of 1H,1H,2H,2H-perfluorooctyltrichlorosilane (4) with allylmagnesium bromide provided key intermediate 1H,1H,2H,2H-perfluorooctyltriallylsilane (2). Hydroboration followed by oxidation, epoxidation and dihydroxylation of 2 gave perfluoroalkyl-containing multifunctional groups compound 1a, 1b and 1c, respectively.     

Synthesis of oligonucleotides containing an O-G-alkyl-O-G interstrand cross-link

A methodology to synthesize oligonucleotides containing an alkyl interstrand cross-link between the two O6 atoms of deoxyguanosine has been developed. This cross-link is designed to serve as a stable structural mimic of the lesion formed in duplex DNA with the bifunctional alkylating agent hepsulfam. The O6-alkyl coupling is performed via a Mitsunobu reaction between a nucleoside and mono-protected 1,7-heptanediol. Solid-phase oligonucleotide synthesis using a nucleoside bis-phosphoramidite allows for the assembly of the cross-linked duplex. Sufficient quantities of this cross-linked duplex were obtained for various structural and biological investigations.     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Mathematical modelling of influence functions in computer-controlled polishing: Part I

Computer-controlled polishing (CCP) is commonly used to finish high-quality surfaces, such as optical lenses. Based on magnetorheological finishing (MRF), a mathematical model to calculate the polishing tool characteristic (influence function) was developed and verified experimentally. The first part of this paper introduces the model to predict the size and shape of an influence function. The second part of this paper describes the calculation of the distribution of material removal within the size of an influence function. The model supersedes the current cumbersome procedure for determining an influence function and thus results in considerably improved and more economical manufacture. Furthermore, the model enables the quality of the final surface to be enhanced when polishing complex, for example aspherical or free-form, workpiece geometries and provides the first step in the application of time-variant influence functions.     

超声萃取/液相色谱-串联质谱法测定染整助剂中的二硬脂基二甲基氯化铵

建立了超声辅助萃取/液相色谱-串联质谱( LC - MS/MS)测定染整助剂中二硬脂基二甲基氯化铵(DSDMAC)的方法.将样品以甲醇为萃取溶剂进行超声萃取,萃取液经过滤后采用LC-MS/MS测定.采用电喷雾离子源,定性离子对为m/z 550.5/298.3、522.5/298.3、522.5/270.3、494.5/...     

Ionenstrahlätzen – Verfahren und Ausrüstungen für die Mikrostrukturierung

Ion beam techniques are widely used jur modification as well us analysis of materials in development and production of VLSI circuits and their importance is continuously increased in course of the reduction of structure dimensions. Some possibilities and problems connected with the application of ion beams of low energy in the pattern transfer are- described and the stage of development achieved in the Central Institute of Isotope and Radiation Research is outlined.